Accueil » Coin des experts » Normes en vibration

Notre gamme

Inscription à la Newsletter

Inscrivez-vous à la Newsletter pour être au courant de toutes les nouveautés et les nouvelles technologies d'AllianTech®

Nouveautés

147 AX 1/2 CCP champ libre robuste
147 AX 1/2 CCP champ libre robuste

147 EB 1/2 CCP champ libre robuste
147 EB 1/2 CCP champ libre robuste

DM1200
DM1200

Votre Demande

0 produit votre devis

Normes en vibration

 

Le tableau suivant vous présente une synthèse des normes et standards du domaine de la vibration

Aller à : AS BS DIN EN IEC ISO JIS MIL VDI

 

Numéro / Source

Titre

ANSI S2.1

Vibration and Shock - Vocabulary

ANSI S2.2

Methods for the Calibration of Shock and Vibration Pickups

ANSI S2.4

Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements

ANSI S2.7

Balancing Terminology

ANSI S2.13

Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation
Part 1: General Guidelines

ANSI S2.16

Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment

ANSI S2.17

Machinery Vibration Measurement

ANSI S2.19

Mechanical Vibration - Balance Quality Requirements of Rigid Rotors
Part 1: Determination of Permissible Residual Unbalance

ANSI S2.25

Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships

ANSI S2.26

American National Standard Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment

ANSI S2.28

Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery

ANSI S2.29

Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery

ANSI S2.40

Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Instruments for Measuring Vibration Severity

Haut de page

ANSI S2.41

Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev/s - Measurement and Evaluation of Mechanical Vibration Severity in situ

ANSI S2.42

Procedures for Balancing of Flexible Rotors

ANSI S2.43

Criteria for Evaluating Flexible Rotor Balance

ANSI S2.45

Electrodynamic Test Equipment for Generating Vibration - Method of Describing Equipment Characteristics

ANSI S2.46

Characteristics to be Specified for Seismic Transducers

ANSI S2.47

Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings

ANSI S2.48

Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics

ANSI S2.58

Auxiliary Tables for Vibration Generators - Methods of Describing Equipment Characteristics

ANSI S2.61

Guide to the Mechanical Mounting of Accelerometers

ANSI S3.18

Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration (ISO 2631)

ANSI S3.29

Guide to the Evaluation of Human Exposure to Vibration in Buildings

ANSI S3.32

Mechanical Vibration and Shock Affecting Man - Vocabulary

ANSI S3.34

Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of

ANSI S3.40

Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (ISO 10819)

ANSI S12.11

Acoustics - Measurement of noise and vibration of small air-moving devices
Part 2: Structure-borne vibration

Haut de page

ANSI/AGMA 6000-B96

Specification for Measurement of Linear Vibration on Gear Units

ANSI/ASHRAE 87.1

Method of Testing Fan Vibration--Blade Vibrations and Critical Speeds

ANSI/ASHRAE 87.3

Methods of Testing Propeller Fan Vibration----Diagnostic Test Methods

ARI 530-95

Method of Rating Sound and Vibration of Refrigerant Compressors

AS 1359.114

Rotating electrical machines - General requirements - Vibration measurements and limits (IEC 34-14


AS 1807.17

AS 1807.18

Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test

Part 17: Determination of vibration in cleanrooms

Part 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators

AS 2362.15

Fire detection, warning, control and intercom systems - Methods of test - Vibration test

AS 2400.10

Packaging - Protection against shock and vibration (cushioning)

AS 2582.6

AS 2582.11

Complete, filled transport packages - Methods of test

Part 6: Vibration test at fixed low frequency

Part 11: Sinusoidal vibration tests using a variable frequency

AS 2606

Vibration and shock - Vocabulary (ISO 2041)

AS 2625.1

AS 2625.4

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816)

Part 1: General guidelines

Part 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

AS 2641

Vibration and shock - Balancing - Vocabulary (ISO 1925)

AS 2670.1

AS 2670.2

AS 2670.4

 

Evaluation of human exposure to whole-body vibration (ISO 2631)

Part 1: General requirements

Part 2: Continuous and shock-induced vibration in buildings (1 to 80Hz)

Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

AS 2763

Vibration and shock - Hand-transmitted vibration - Guidelines for measurement and assessment of human exposure

AS 2775

Mechanical vibration and shock - Mechanical mounting of accelerometers (ISO 5348)

AS 2955

Earth-moving machinery - Tests and measurements - Operator seat - Transmitted vibration

AS 2973

Vibration and shock - Human response vibration-measuring instrumentation

AS 2993

Vibration and shock - Dynamic characteristics of the human body - Driving point impedance of the human body

AS 3658

Vibration and shock - Mechanical vibration and shock affecting humans - Vocabulary (ISO 5805)

Haut de page

AS 3709

Vibration and shock - Balance quality of rotating rigid bodies (ISO 1940-1)

AS 3721

Vibration and shock - Balancing machines - Description and evaluation (ISO 2953)

AS 3728

Vibration and shock - Resilient shaft couplings - Information to be supplied by users and manufacturers

AS 3762

Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868)

AS 3763

Mechanical vibration and shock - Guidelines for the overall evaluation of vibration in merchant ships (ISO 6954)

AS 3764

The measurement and reporting of shipboard vibration data (ISO 4867)

AS 4594.5

Internal combustion engines - Performance - Engines for land, rail-traction and marine use - Torsional vibrations (ISO 3046)

ASTM D999-01

Standard Methods for Vibration Testing of Shipping Containers

ASTM D3580-95

Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products

ASTM D4728-01

Standard Test Method for Random Vibration Testing of Shipping Containers

ASTM D5112-98

Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products

ASTM D6874-03

Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

BS 848-7

Fans for general purposes. Specifications for balancing and vibration (ISO 14694)

BS 848-10

Fans for general purposes. Performance testing of jet fans (ISO 13350)

BS 2011-2

Environmental testing. Tests. Test Fda. Random vibration - wide band reproducibility high

BS 2782

Methods of testing plastics (ISO 6721)

BS 3015

Glossary of terms relating to mechanical vibration and shock (ISO 2041)

BS 3375

Management services. Guide to determination of exposure limits, recovery times and relaxation times in work measurement

Haut de page

BS 4220

Tests for a seat intended for a nominated tractor model; provides for measurement of transmitted vertical vibration on artificial track.

BS 4675-2

Mechanical vibration in rotating machinery. Requirements for instruments for measuring vibration severity (ISO 2954)

BS 4999-142

General requirements for rotating electrical machines. Specification for mechanical performance: vibration

BS 5000-3

Specifies generators with outputs greater than 0.75 kW or kVA per 100 r/min, matched to characteristics of internal combustion engines. Torsional and linear vibrational withstand levels are specified

BS 5228-1

BS 5228-2

BS 5228-3

BS 5228-4

BS 5228-5

Noise and vibration control on construction and open sites.
Part 1: Code of practice for basic information and procedures for noise and vibration control

Part 2: Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance

Part 3: Code of practice applicable to surface coal extraction by opencast methods

Part 4: Code of practice for noise and vibration control applicable to piling operations

Part 5: Code of practice applicable to surface mineral extraction (except coal) sites

BS 6140-2

Test equipment for generating vibration. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration (ISO 6070)

BS 6414

Method for specifying characteristics of vibration and shock isolators (ISO 2017)

BS 6472

Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)

BS 6611

Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)

BS 6632

Method for measurement and reporting of shipboard vibration data (ISO 4867)

BS 6633

Method for measurement and reporting of local vibration data of ship structures and equipment (ISO 4868)

BS 6794

Method for reporting measured vibration data for land vehicles (ISO 8002)

BS 6841

Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock

BS 6861-1

BS 6861-2

Mechanical vibration. Balance quality requirements of rigid rotors.

Part 2: Mechanical vibration. Balance quality requirements of rigid rotors. Balance errors (ISO 1940-2)

BS 6897

Experimental determination of mechanical mobility (ISO 7626)

Haut de page

BS 6916-8

Chain saws. Method of measurement of hand-transmitted vibration (ISO 7505)

BS 6955-1..22

Calibration of vibration and shock pick-ups (ISO 5347)

BS 7085

Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock

BS 7119

Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups (ISO 8042)

BS 7385-1

BS 7385-2

Evaluation and measurement for vibration in buildings.

Part 1: Guide for measurement of vibrations and evaluation of their effects on buildings (ISO 4866)

Part 2: Guide to damage levels from groundborne vibration

BS 7482-1

BS 7482-2

BS 7482-3

Instrumentation for the measurement of vibration exposure of human beings.

Part 1: Specification for general requirements for instrumentation for measuring the vibration applied to human beings

Part 2: Specification for instrumentation for measuring vibration transmitted to the hand

Part 3: Specification for instrumentation for measuring vibration exposure to the whole body

BS 7527-2.6

Classification of environmental conditions. Environmental conditions appearing in nature. Earthquake vibration and shock (IEC 60721-2-6)

BS 7698-9

Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations (ISO 8528-9)

BS 7853

Mechanical vibration. Road surface profiles. Reporting of measured data (ISO 8608)

BS 7854

Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816)

CR 1030-1

CR 1030-2

Hand-arm vibration - Guidelines for vibration hazards reduction

Part 1: Engineering methods by design of machinery

Part 2: Management measures at the workplace

CR 12349

Mechanical vibration - Guide to the health effects of vibration on the human body

DIN 1311-1
DIN 1311-2
DIN 1311-3
DIN 1311-4

Mechanical vibrations, oscillation and vibration systems
Part 1: Basic concepts, survey
Part 2: Linear vibration systems with single degree of freedom
Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom
Part 4: Vibration; vibrating continua, waves

DIN 3979

Tooth Damage on Gear Trains; Designation, Characteristics, Causes

DIN 4150-1
DIN 4150-2
DIN 4150-3

Vibrations in buildings
Part 1: Prediction of vibration parameters
Part 2: Effects on persons in buildings
Part 3: Effects on structures

DIN 4178

Construction supervision: technical building regulations; bell towers

DIN 5426-1

Rolling bearings - Rolling bearing vibration and noise
Part 1: Methods for measurement of structure-borne noise

Haut de page

DIN 25475-2

Nuclear facilities - Operational monitoring
Part 2: Vibration monitoring for early detection of changes in the vibrational behaviour of the primary coolant circuit in pressurized water reactors

DIN 30787-6

Transportation loads - Measurement and evaluation of dynamic mechanical loads
Part 6: Automatic recording systems for measuring random shock while monitoring transports

DIN 31692-3

Plain bearings
Part 3: Vibration monitoring

DIN 45635-8

Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements

DIN 45661

Vibration measuring instrumentation - Vocabulary

DIN 45662

Vibration measuring instrumentation - Fundamental requirements and verification

DIN 45667

Classification methods for evaluation of random vibrations

DIN 45669-1
DIN 45669-2

DIN 45669-3

Measurement of vibration immission
Part 1: Vibration meters; requirements, verification
Part 2: Measuring method

Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ (draft standard)

DIN 45671-1
DIN 45671-3

Measurement of exposure to occupational vibration
Part 1: Vibration meters; Requirements, testing
Part 3: Test (calibration and assessment) of the vibration meter; primary test, verification, intermediate test, check in situ

DIN 45672-1
DIN 45672-2

Vibration measurement associated with railway traffic systems
Part 1: Measuring method
Part 2: Evaluation method

DIN 45673-1
DIN 45673-2

Mechanical vibration - Resilient elements used in railway tracks
Part 1: Laboratory determination of static and dynamic characteristics
Part 2: Determination of static and dynamic characteristics in the track under operation

DIN 45675-2
DIN 45675-3

Exposure to mechanical vibration transmitted to the hand-arm system
Part 2: Measurement of vibration induced by portable chain saws
Part 3: Measurement of vibration induced by portable, internal combustion engine brush saws

DIN 45678

Mechanical vibration - Articulated trucks - Laboratory method for evaluating vehicle seat vibration

DIN V 45679

Mechanical vibration - Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration

DIN 45694

Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration based on information provided by manufacturers of machinery (draft standard)

Haut de page

DIN 45695

Hand-arm vibration - Guidelines for vibration hazards reduction - Engineering and management measures (CR 1030-1 and CR 1030-2)

DIN 50100

Testing of Materials; Continuous Vibration Test; Definitions, Symbols, Procedure, Evaluation

DIN 52210

Testing of acoustics in buildings; airborne impact and sound insulation

DIN 70003

Vibrational stress; measurement of parameters on vehicle parts

D5112-98

Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products

D3580-95

Standard Test Methods for vibration (Vertical Linear Motion) Test of Products

EN 1032

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

EN 1033

Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General

EN 1299

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

EN 12096

Mechanical vibration - Declaration and verification of vibration emission

EN 12786

Safety of machinery - Guidance for the drafting of vibration clauses of safety standards

EN 13059

Safety of industrial trucks - Test methods for measuring vibration

EN 13490

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

EN 14253

Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance

EN 28662-1

EN 28662-2

EN 28662-3

EN 28662-5

Hand-held portable power tools - Measurement of vibrations at the handle
Part 1: General (
ISO 8662-1)

Part 2: Chipping hammers and riveting hammers (ISO 8662-2)

Part 3: Rock drills and rotary hammers (ISO 8662-3)

Part 5: Pavement breakers and hammers for construction work (ISO 8662-5)

EN 30326-1

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration
Part 1: Basic requirements (ISO 10326-1)

Haut de page

EN 60034-14

Rotating electrical machines - Part 14 : Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration

EN 60994

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

EN 61959

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

ENV 25349

Mechanical vibration - Guidelines for the measurement and the assessment
of human exposure to hand-transmitted vibration (ISO 5349)

ENV 28041

Human response to vibration - Measuring instrumentation (ISO 8041)

E90-E350

Methods for the calibration of vibration and shock pick-ups

FD E90-694

Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system.

IEC 60034-14

Rotating electrical machines
Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

IEC 60068-2-..

Environmental testing
Part 2: Methods of test

IEC 60068-3-8

Environmental testing
Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

IEC 60255-21

Electrical relays
Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment

IEC 60512-6-4
IEC 60512-6-5

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -
Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

IEC 60721-2-6

Classification of environmental conditions
Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock

IEC 60994

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

IEC 60745

Hand-held motor-operated electric tools - Safety

IEC 60749-12

Semiconductor devices - Mechanical and climatic test methods
Part 12: Vibration, variable frequency

IEC 61300-2-1

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures
Part 2-1: Tests - Vibration (sinusoidal)

IEC 61373

Railway applications. Rolling stock equipment. Shock and vibration tests

Haut de page

IEC 61502

Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures

ISO 140

Acoustics -- Measurement of sound insulation in buildings and of building elements

ISO 1925

Mechanical vibration - Balancing - Vocabulary

ISO 1940-1

ISO 1940-2

Mechanical vibration – Balance quality requirements of rigid rotors
Part 1: Determination of permissible residual unbalance

Part 2: Balance errors

ISO 2017

Method for specifying characteristics of vibration and shock isolators

ISO 2041

Vibration and shock – Vocabulary

ISO 2247

Packaging -- Complete, filled transport packages and unit loads -- Vibration tests at fixed low frequency

ISO 2371

Field balancing equipment – Description and evaluation (withdrawn)

ISO 2372

Mechanical vibration of machines with operating speeds from 10 to 200 rev/s – Basis for specifying evaluation standards (withdrawn, replaced by ISO 10816-1)

ISO 2373

Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm -- Measurement and evaluation of the vibration severity (withdrawn)

ISO 2631-1

ISO 2631-2

ISO 2631-4

ISO 2631-5

Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration
Part 1: General requirements

Part 2: Vibration in buildings (1 Hz to 80 Hz)

Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

Part 5: Method for evaluation of vibration containing multiple shocks

ISO 2671

Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration

ISO 2953

Balancing machines – Description and evaluation

ISO 2954

Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity

ISO 3046-5

Reciprocating internal combustion engines -- Performance
Part 5: Torsional vibrations

Haut de page

ISO 3945

Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s – Measurement and evaluation of vibration severity in situ (withdrawn, replaced by ISO 10816)

ISO 4866

Evaluation and measurement for vibration in buildings. Guide for measurement of vibrations and evaluation of their effects on buildings

ISO 4867

Method for measurement and reporting of shipboard vibration data

ISO 4868

Method for measurement and reporting of local vibration data of ship structures and equipment

ISO 5007

Agricultural wheeled tractors. Operator's seat. Laboratory measurement of transmitted vibration

ISO 5008

Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator

ISO 5344

Electrodynamic vibration generating systems - Performance characteristics

ISO 5347-4

ISO 5347-5

ISO 5347-6

ISO 5347-7

ISO 5347-8

ISO 5347-10

ISO 5347-11

ISO 5347-12

ISO 5347-13

ISO 5347-14

ISO 5347-15

ISO 5347-16

ISO 5347-17

ISO 5347-18

ISO 5347-19

ISO 5347-22

Methods for the calibration of vibration and shock pick-ups
Part 4: Secondary shock calibration

Part 5: Calibration by Earth's gravitation

Part 6: Primary vibration calibration at low frequencies

Part 7: Primary calibration by centrifuge

Part 8: Primary calibration by dual centrifuge

Part 10: Primary calibration by high impact shocks

Part 11: Testing of transverse vibration sensitivity

Part 12: Testing of transverse shock sensitivity

Part 13: Testing of base strain sensitivity

Part 14: Resonance frequency testing of undamped accelerometers on a steel block

Part 15: Testing of acoustic sensitivity

Part 16: Testing of mounting torque sensitivity

Part 17: Testing of fixed temperature sensitivity

Part 18: Testing of transient temperature sensitivity

Part 19: Testing of magnetic field sensitivity

Part 22: Accelerometer resonance testing -- General methods

ISO 5348

Mechanical vibration and shock – Mechanical mounting of accelerometers

ISO 5349-1

ISO 5349-2

Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration
Part 1: General requirements

Part 2: Practical guidance for measurement at the workplace

ISO 5805

Mechanical vibration and shock affecting man – Vocabulary

ISO 5982

Mechanical vibration and shock -- Range of idealized values to characterize seated-body biodynamic response under vertical vibration

ISO 6070

Auxiliary tables for vibration generators – Methods of describing equipment characteristics

ISO 6721

Determination of dynamic mechanical properties

ISO 6897

Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)

Haut de page

ISO 6954

Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships

ISO 7096

Earth-moving machinery. Laboratory evaluation of operator seat vibration

ISO 7505

Forestry machinery -- Chain saws -- Measurement of hand-transmitted vibration

ISO 7626-1

ISO 7626-2

ISO 7626-5

Vibration and shock – Experimental determination of mechanical mobility
Part 1 : Basic definitions and transducers

Part 2: Measurements using single-point translation excitation with an attached vibration exciter

Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

ISO/TR 7849

Acoustics -- Estimation of airborne noise emitted by machinery using vibration measurement

ISO 7916

Forestry machinery -- Portable brush-saws -- Measurement of hand-transmitted vibration

ISO 7919-1

ISO 7919-2

ISO 7919-3

ISO 7919-4

ISO 7919-5

Mechanical vibration of non-reciprocating machines -Measurements on rotating shafts and evaluation
Part 1: General guidelines

Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

Part 3: Coupled industrial machines

Part 4: Gas turbine sets

Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 8002

Method for reporting measured vibration data for land vehicles

ISO 8041

Human response to vibration. Measuring instrumentation

ISO 8042

Shock and vibration measurements – Characteristics to be specified for seismic pick-ups

ISO 8313

Packaging -- Complete, filled transport packages and unit loads -- Sinusoidal vibration tests using a variable frequency

ISO 8568

Mechanical shock – Testing machines - Characteristics and performance

ISO 8569

Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings

ISO 8528-9

Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations

ISO 8579-2

Acceptance code for gears
Part 2: Determination of mechanical vibrations of gear units during acceptance testing

Haut de page

ISO 8608

Mechanical vibration -- Road surface profiles -- Reporting of measured data

ISO 8626

Servo-hydraulic test equipment for generating vibration – Method of describing characteristics

ISO 8662-1

ISO 8662-2

ISO 8662-3

ISO 8662-4

ISO 8662-5

ISO 8662-6

ISO 8662-7

ISO 8662-8

ISO 8662-9

ISO 8662-10

ISO 8662-11

ISO 8662-12

ISO 8662-13

ISO 8662-14

Hand-held portable power tools -- Measurement of vibrations at the handle
Part 1: General

Part 2: Chipping hammers and riveting hammers

Part 3: Rock drills and rotary hammers

Part 4: Grinders

Part 5: Pavement breakers and hammers for construction work

Part 6: Impact drills

Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action

Part 8: Polishers and rotary, orbital and random orbital sanders

Part 9: Rammers

Part 10: Nibblers and shears

Part 11: Fastener driving tools

Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action

Part 13: Die grinders

Part 14: Stone-working tools and needle scalers

ISO 8727

Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems

ISO 8821

Mechanical vibration – Balancing – Shaft and fitment key convention

ISO 9688

Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses

ISO 9996

Mechanical vibration and shock -- Disturbance to human activity and performance -- Classification

ISO 11342

Mechanical vibration – Methods and criteria for the mechanical balancing of flexible rotors

ISO 10055

Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components

ISO 10056

Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles

ISO 10068

Mechanical vibration and shock -- Free, mechanical impedance of the human hand-arm system at the driving point

ISO 10326-1

ISO 10326-2

Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration
Part 1: Basic requirements

Part 2: Application to railway vehicles

ISO/TS 10811-1
ISO/TS 10811-2

Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment
Part 1: Measurement and evaluation
Part 2: Classification

Vibration generating machines -- Guidance for selection
Part 1: Equipment for environmental testing
Part 3: Equipment to be used in a shock mode (draft standard)

ISO 10814

Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance

Haut de page

ISO 10815

Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains

ISO 10816-1

ISO 10816-2

ISO 10816-3

ISO 10816-4

ISO 10816-5

ISO 10816-6

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts
Part 1: General guidelines

Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

Part 4: Gas turbine driven sets excluding aircraft derivatives

Part 5: Machine sets in hydraulic power generating and pumping plants (available in English only)

Part 6: Reciprocating machines with power ratings above 100 kW

ISO 10817-1

Rotating shaft vibration measuring systems -- Part 1: Relative and absolute sensing of radial vibration

ISO 10819

Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

ISO 10846-1

ISO 10846-2

ISO 10846-3

ISO 10846-4

Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements
Part 1: Principles and guidelines

Part 2: Dynamic stiffness of elastic supports for translatory motion -- Direct method

Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion

Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion

ISO 11342

Mechanical vibration -- Methods and criteria for the mechanical balancing of flexible rotors

ISO 13090-1

Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people
Part 1: Exposure to whole-body mechanical vibration and repeated shock

ISO 13091-1
ISO 13091-2

Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction
Part 1: Methods of measurement at the fingertips
Part 2: Analysis and interpretation of measurements at the fingertips

ISO 13332

Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet

ISO 13350

Industrial fans -- Performance testing of jet fans

ISO 13355

Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test

ISO 13373-1

Condition monitoring and diagnostics of machines. Vibration condition monitoring.
Part 1: General procedures

ISO 13374

Condition monitoring and diagnostics of machines - Data processing, communication and presentation

ISO 13379

Condition monitoring and diagnostics of machines - General guidelines on data interpretation and diagnostics techniques

ISO 13753

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

ISO 14694

Industrial fans -- Specifications for balance quality and vibration levels

ISO 14695

Fans for general purposes. Method of measurement of fan vibration

Haut de page

ISO 14839-1

ISO 14839-2

Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings
Part 1: Vocabulary

Part 2: Evaluation of vibration

ISO 14963

Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts

ISO 14964

Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration

Rolling bearings -- Measuring methods for vibration
Part 1: Fundamentals
Part 2: Radial ball bearings with cylindrical bore and outside surface

Part 3: Radial double-row spherical and tapered roller bearings with cylindrical bore and outside surface

ISO 15243

Rolling bearings -- Damage and failures -- Terms, characteristics and causes

ISO/TS 15694

Mechanical vibration and shock -- Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system

ISO 16063-1

ISO 16063-11

ISO 16063-12

ISO 16063-13

ISO 16063-21

ISO 16063-22

Methods for the calibration of vibration and shock transducers
Part 1: Basic concepts

Part 11: Primary vibration calibration by laser interferometry

Part 12: Primary vibration calibration by the reciprocity method

Part 13: Primary shock calibration using laser interferometry

Part 21: Vibration calibration by comparison with a reference transducer

Part 22: Shock calibration by comparison with a reference transducer (replacement for ISO 5347-4)

ISO 18436-2

Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel
Part 1: Requirements for certifying bodies and the certification process

Part 2: Vibration condition monitoring and diagnostics

ISO 18649

Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges

ISO 20643

Mechanical vibration -- Hand-held and hand-guided machinery -- Principles for evaluation of vibration emission

ISO 22867

Forestry machinery -- Vibration test code for portable hand-held machines with internal combustion engine -- Vibration at the handles

JIS B 0906

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- General guidelines

JIS B 0907

Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity

JIS B 0910

Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria

JIS B 0911

Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance

JIS B 1754

Acceptance code for gears
Part 2: Determination of mechanical vibrations of gear units during acceptance testing

JIS C 1510

Vibration level meters

JIS C 1512

Level recorders for recording sound level and/or vibration level

JIS D 1601

Vibration testing methods for automobile parts

Haut de page

JIS E 3014

Parts for railway signal -Vibration test methods

JIS E 4023

Vibration characteristics of railway rolling stock -- Measuring methods

JIS E 4031

Railway rolling stock parts -- Test methods for vibration

JIS Z 0232

Packaged freights -- Method of vibration test

JIS Z 8735

Methods of measurement for vibration level

MIL-A-8870C

Airplane Strength and Rigidity Vibration, Flutter, and Divergence

MIL-STD-167

Mechanical Vibrations On Ship Board Systems

MIL-STD-167/1

Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited)

MIL-STD-167/2

MIL-STD-167/2 Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V

MIL-STD-202G

Test Method 201A: Vibration

MIL-STD-202G

Test Method 204D: Vibration, High Frequency

MIL-STD-202G

Test Method 214A: Random Vibration

MIL-STD-810F

Test Method Standard For Environmental Engineering

NF S30-102

Acoustics. Terminology. Transmission systems and transducers for sound and vibrations

PD 6585-2

Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace

S31-087

Acoustics. Estimation of airborne noise emitted by machinery using vibration measurement

VDI 2056

Evaluation of mechanical vibrations of rotating machinery (withdrawn); replacement: ISO 10816

VDI 2057-1
VDI 2057-2
VDI 2057-3
VDI 2057-4.1
VDI 2057-4.2
VDI 2057-4.3

Human exposure to mechanical vibrations
Part 1: Whole-body vibration
Part 2: Hand-arm vibration
Part 3: Assessment (withdrawn)
Part 4.1: Measurements and assessment for workshop places in buildings
Part 4.2: Measurement and evaluation for workshop places on vehicles (withdrawn)
Part 4.3: Measurements and assessment for ships and floating vessels (withdrawn); replacement: ISO 6954

VDI 2059-1
VDI 2059-3
VDI 2059-4
VDI 2059-5

Shaft vibrations of turbosets; principles for measurement and evaluation
Shaft vibrations of industrial turbosets; measurement and evaluation
Shaft vibrations of gas turbosets; measurement and evaluation
Shaft vibrations of gas turbosets; measurement and evaluation

VDI 2062

Shock and vibration isolation
Part 1: Conceptions and principles
Part 2: Isolation elements, materials and component parts of isolation

VDI 2063

Measurement and evaluation of mechanical vibrations of reciprocating piston engines and piston compressors (withdrawn); replacement: VDI 3838

VDI 3832

Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of state condition

VDI 3837

Groundborne vibration arising from rail systems at grade - Spectral prediction method (draft)

VDI 3838

Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW - Addition to ISO 10816-6

VDI 3839-1
VDI 3839-2
VDI 3839-4
VDI 3839-5
VDI 3839-8

Instructions on measuring and interpreting the vibrations of machines
Part 1: General principals
Part 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components
Part 4: Typical vibration patterns with fans (draft)
Part 5: Typical vibration patterns with electrical machines
Part 8: Typical vibration patterns with reciprocating machines

VDI 3840

Vibration analysis for machine sets

VDI 3841

Vibration monitoring of rotating machinery - necessary measurement

VDI 3842

Vibrations in piping systems

Haut de page

 

Aller à : AS BS DIN EN IEC ISO JIS MIL VDI